Comments for

Comment on Heat Pump condenser. Can a person take a heat pump condenser and use it on a ac air handler with natural gas? by uncledjm14

uncledjm14 — Wed, 22 Feb 2012 21:14:23 +0000

As long as the tonnage is the same it’ll work just fine. You’ll probably have to wire 24v to the reversing valve to put it in cool mode, although there are a few models which do not require this. Look on the schematic; if your model requires a wire hooked to the O terminal, put 24v to that terminal. If it requires a wire to the B terminal, do nothing. Good luck.

Comment on how to solve: Jumping spin-dryer problem? by Dowlinggram

Dowlinggram — Mon, 20 Feb 2012 08:31:45 +0000

A poorly balanced load will make the dryer or any machine wobble but yours is excessive. I think the stabilizer springs are broken.They keep the drum from going out of control like yours. I don’t own a spin dryer but I have had them break on my regular dryer. In my dryer they are on the bottom front, under the drum. I don’t know where they are on yours. It was very cheap to fix, although if you have to get someone in to do it there will be labour charges.

Comment on where can i find belts for a antique hoover spin dryer washer? by bingo488092003

bingo488092003 — Sun, 19 Feb 2012 20:51:44 +0000

try a auto parts store, show them the belt.
they,re should some kind of information on the washer.
there are places that,ll fix washers and dryers.
wrap a piece piece of string around all of your pulleys for an exact measurement.
try Hoover sweepers,s address http://www.hoover sweeper.com

Comment on where can i find belts for a antique hoover spin dryer washer? by Chris C

Chris C — Sun, 19 Feb 2012 20:38:51 +0000

possibly a vacuum repair shop too….

Comment on Q&A: Can I use a condenser and dynamic mic in the same mixer? by Outta Touch

Outta Touch — Sun, 19 Feb 2012 09:20:52 +0000

SHURE has a nice little 5 channel mixer, but it’s not ‘cheap’